Product Description

◆**0 * *4 Graphic LCD display, user-friendly interface , easy operation.

◆Chinese and English interface,  meeting the different needs of different users

◆Test mode can be set arbitrarily.

◆Constant voltage output regulation  range of the output voltage is within  ± 1%; which guarantees the output voltage will not vary with the power supply and external load. Measurement is accurate.

◆Fast discharge function The tester can discharge the DUT and the circuit quickly within 0.2s after DCW and IR test finishing; which ensures safety of operators.

◆DCW test with Open-circuit detection Preventing misjudge when test lead is off-line.

◆ With the OSC function.

◆Over-zero start Preventing damage of DUT.

◆ Voltage rise as time, looking for the breakdown points.

◆Set the current high-limit and low-limit alarm, to prevent misjudge when test lead is off-line.

◆Set offset value.

◆ During the testing, users can change the output voltage manually.

◆The tester is with real current measurement function.

◆ ARC function.

◆With GFI protection.

◆Pre-set and save the test parameters *0 groups and *9 steps.

◆Keyboard lock, to avoid the test parameters are modified by the operator.

◆Front panel software calibration.

◆ PLC interface is standard, optional RS**2C, RS**5, USB, GPIB interfaces.







◆ Electricity safety wall system, to protect the safety of users, DUT and testing equipment.

◆ DDS plus linear power amplifier to drive standard sine waveform, to make the pure output voltage waveform distortion is less than 2%.

◆ Rapid voltage build time

  (1) AC output voltage building time is **0ms, and DC output voltage building time is *0ms.

◆Set the voltage rise time, test time, fall time and interval time .

◆PLC interface can output either *4V level or contact signal